◆ A story · one pilot

Made by
a pilot. For pilots.

Dream Pilot is a workshop of three people in Prague, run by Kirill, a working private pilot with 230 hours, mostly in a Cessna 172 named OK-MMA. This is how it started, and why we still build every unit by hand.

◆ · Founder · PPL · 230 h
◆ Logbook · Dream Pilot
DOC · DP-LOG-26 · REV 03
Date Milestone Location Type
2020 · Q1 Clamp kneeboard Kitchen table · Žižkov Ideation
2020 · Q3 500 pilots with clamp kneeboard US + EU Growth
2021 · Q3 Magnetic Prototypes 01 → 12 Workshop · Pernink, Ore Mountains Ideation
2022 · Q4 First 100 units Workshop · Pernink, Ore Mountains Ship
2023 · Q4 500 pilots US + EU + UK + CH Growth
2025 · Q2 MIL-STD 810G pass Eurofins · Bayreuth Cert
2026 · Q1 15000+ pilots US · EU · UK · CH · ZA · SG Now
◆ The problem

It started with a phone. And a strap.

I was flying in a small cockpit with a phone I had nowhere to put. The kneeboards I could find were expensive and made for specific tablets, mostly the iPad mini. I wanted something simple and affordable that worked with the phone I already had.

So I glued a strap to a spare phone case. It worked for a couple of flights. Then I got tired of swapping cases every time I went flying. I wanted one holder I could use with a phone or a tablet, even if I changed devices. That’s how the clamp kneeboard was born.

The clamp solved the case problem. It also sat high off my leg, and the higher it sat, the more it wobbled. Turning the screen from portrait to landscape took more fiddling than it should have.

I was driving through the mountains when I came back to the question: how do I get the screen closer to my leg and still make it easy to turn? Somewhere along that drive, the idea clicked. A magnet could do the work of the clamp without all the bulk.

❝
The screen should stay put. The holder should stay out of the way. Phone today, tablet tomorrow. Same kneeboard.
— Kirill
◆ The workshop

A magnet, a strap, a friend's 3d-printer.

My friend had a CAD background and 3d-printer. We started with the magnet: N52 neodymium, four cells in a diamond array around a central MagSafe ring. It locked an iPad Mini onto my leg with 4.2 kgf of force, and let it twist 360° between portrait and landscape without unstrapping.

Twelve iterations later, the holder and strap geometry were right. Soft silicone on top - took us several months to find the correct hardness and shape. Reinforced adjustable elastic with a Velcro buckle. A plastic back-panel that doesn't dig into your skin on a hot summer flight.

I flew with prototype 12 for six months without a single failure. Then we gave prototypes to a group of test pilots. Some asked if they could keep theirs. We built our first hundred in a small workshop in Pernink and started shipping to local pilot shops. The first stock sold out fast.

◆ 01 / 04
12
Prototypes
Before we shipped one
◆ 02 / 04
6
Components
In the magnetic base
◆ 03 / 04
15,000+
Pilots
Flying with one today
◆ 04 / 04
100%
Hand finished
In Prague, one at a time
◆ The cert

Then we sent it to Germany.

Anyone can claim military-grade. We figured if we were going to use the language, we'd better mean it. We sent ten production units to Eurofins, an independent test lab accredited by DAkkS (the German national accreditation body, mutually recognised through ILAC).

They ran us through three procedures from MIL-STD 810G, the same shock and vibration profile the US Department of Defense uses on rotorcraft equipment. Procedure 516 (shock). Procedure 514 (vibration). Procedure 507 (humidity).

Every batch since has been tested against the same profile. If you want to read the full test report, email us and we'll send the PDF.

◆ A note

From Kirill.

I will personally answer your email within 24 hours, every day of the week. If your kneeboard ever fails on a flight, send me a message and I'll replace it from my own desk, no questions asked.

This isn't a marketing line. It's just what a workshop of three people in Prague can promise, and stick to. Safe flights.

Kirill
◆ Founder · Dream Pilot
◆ info@pilotkneeboard.com
◆ Today

Three people. Same workshop.

We have not raised money. We have no investors and no plans for any. Every unit ships from our workshop in Pernink, hand-finished in Prague by either Kirill or Viktoriia, within 48 hours of you ordering.

◆ The team
K
Kirill Metrik
Founder · Design · Pilot
230 h PPL · C152 · C172
D
Dmitriy Kukushkin
Co-Founder · Workshop · Production
Joined 2024 · Pernink, Ore Mountains
V
Viktoriia Olejnykova
Workshop · Assembly · QC
Joined 2024 · Prague
Plzeň
Karlovy Vary
Ústí nad Labem
Liberec
Hradec Králové
České Budějovice
◆ Production · Pernink
◆ Assembly & operations · Praha
◆ Test flights · LKMB
◆ HQ / Hangar

Where the work happens.

◆ Production
Pernink · Ore mountains
Parts production & machining
◆ Assembly, packing & operations
Dream Pilot
Karla Dlouhého 938/3, Praha 18
info@pilotkneeboard.com
◆ Testing & flying
Airfield Mladá Boleslav · LKMB
Cessna 172 · OK-MMA
Weather permitting
◆ Epilogue

Fly with
care.

That's the whole thing. It's printed on every unit we ship, and it works as both an instruction and a hope. Now go look at the catalog.

TAILWINDS

News from the hangar.

New gear. Useful updates. An occasional note from Kirill. Only when we have something worth sharing.

No spam. No nags. Unsubscribe anytime.